HARDI ISO NANODRIFT Nozzles

SKU:

 5,70 10,00 (ex. tax)

The HARDI NANODRIFT nozzles should be used when high drift reduction is required. The NANODRIFT nozzle will at low pressures reduce drift to a minimum. The droplet spectrum is coarse to very coarse; safe for drift control but without risking poor coverage and deposition on leaves.

The NANODRIFT is available in 8 sizes and has a working pressure of 20 to 80 psi, this nozzle is the ideal solution when higher volume rates are required.
The commonly used size of HARDI NANODRIFT nozzles is approved at the German Julius Kuehn Institute (JKI) and will be registered in the drift reduction technology scheme. The Julius Kuehn drift reduction level is the highest worldwide and the registration is used in several countries in Europe

  • Air inclusion nozzle.
  • Working pressure – 20 to 80 psi
  • ISO – flow, colours, sizes and nomenclature
  • Application rates from 22.5 to 221.5 gallons per acre (gpa) at a speed of 5 miles per hour (mph)
  • SYNTAL – precision moulded thermoplastic
  • S-Tip to allow mounting on other sprayer brands
NANODRIFT 02 approved 21.75 to 87 psi maximum drift reduction 75 %
NANODRIFT 025 approved 21.75 to 87 psi maximum drift reduction 90 %
NANODRIFT 03 approved 14.5 to 87 psi maximum drift reduction 90 %
NANODRIFT 04 approved 14.5 to 87 psi maximum drift reduction 90 %*
NANODRIFT 05 approved 14.5 to 87 psi maximum drift reduction 90 %

* expected in 2022

SKU: N/A Categories: ,